Image description

                                                                                                                                                                                                                                        Integral concrete protection since 1985

 


Products: 

 

Mix Water Additives

 

PROTECRETE MWC

Mix water conditioner is added to concrete’s mix water to convert a conventional Portland cement concrete design into a high performance / high durability concrete mix by enabling the maximum beneficial degree of hydration currently possible, whilst lowering the concretes capillary pore size.


Waterproofing, Curing, Hardening

 

PROTECRETE Vaporlock

Penetrates new or existing concrete to permanently form an integral barrier. PROTECRETE Vaporlock Densifier will cure, harden and restrict moisture vapour transmission.

Protecrete Vaporlock is regularly specified and applied to the concrete sub floor prior to floor coverings / coatings in order to restrict the concrete moisture vapour transmission to below the floor covering / coating manufacturers permissable levels. Protecrete Vaporlock is described in AS 1884-2012 Floor coverings- Resilient sheet and tiles- Installation practices as "penetrative moisture suppressants".

Protecrete Vaporlock does not leave a surface residue or topical membrane to interfere with surface bonding quality.

Vaporlock is spray applied, and is compatible with adhesives, coatings, and or cementitious floor preparation / levelling products.


PROTECRETE Densifier

Penetrates new or existing concrete to permanently form an integral waterproofing / barrier even against internal migration / Hydrostatic pressure. PROTECRETE Densifier will cure, harden and preserve concrete whilst providing an effective chloride iron barrier and virtually eliminating vapours such as Radon etc.

Protecrete Densifier does not leave a surface residue or topical membrane to interfere with surface bonding quality.

Densifier is spray applied, and is compatible with adhesives, coatings, and or cementitious floor preparation / levelling products.


PROTECRETE Densifier Plus Antimicrobial

All the benefits of PROTECRETE Densifier with the addition of a long lasting antimicrobial additive, factory blended for the convenience of one application.


PROTECRETE Densifier Plus Repeller

A combination of PROTECRETE Densifier and PROTECRETE Repeller, factory blended for the convenience of a one spray application.


PROTECRETE Densifier with Surface Gloss

All the benefits of PROTECRETE Densifier with the addition of a long lasting Semi Gloss surface shine, factory blended for the convenience of one application on brand new concrete only.


Arresting / Preventing Rebar Corossion

PROTECRETE Densifier for Rebar

All the benefits of PROTECRETE Densifier with the addition of an added steel preservative for remedial treatment (apparent corrosion taking place) PROTECRETE Densifier For Rebar  arrests or greatly retards destructive corrosion activity through subsequent removal of electrolyte, oxide (scale) deaeration, and oxygen deprivation  at the steels surface.

As a preventative, PROTECRETE Densifier For Rebar works to prevent the corrosive process from commencing by neutralising acids (if any) which are mainly responsible for pitting, oxygen deprivation and conversion of the steel’s protective oxide coating from a two valance oxide to a three valance one. PROTECRETE Densifier For Rebar permanently deprives treated areas of the main ingredient required for corrosion, which is electrolyte.


Surface Sealers and Membranes

PROTECRETE Repeller

An aqueous penetrating sealer treatment which provides a tough, filmless, UV resistant barrier to help maintain and preserve the original untreated appearance of porous surfaces such as concrete by preventing contaminants such as oil, water and or dirt.


PROTECRETE Radiance

A tough, low sheen, breathable, UV resistant coating to help maintain and preserve the appearance of the surface by preventing liquid and or contaminant penetration.


PROTECRETE Redeemer

A penetrating non toxic, non flammable acrylate aqueous dispersion, that when applied and fully cured, developes into a strong, durable, flexible and breathable Gloss coating which adheres tenaciously to clean bare surfaces such as concrete, drywall, power wall, masonary and wood etc. PROTECRETE redeemer can be power troweled into weak concrete  surfaces to provide extra strength, integrity, flexibility, and chemical / acid resistance. PROTECRETE redeemer is also an excellent paver joint sand consolidator.


PROTECRETE Floor Saver System

A two part waterproofing system designed specifically to address the concrete moisture / Hydrostatic pressure/ Relative humidity (Rh) issues prior to the installation of floor coverings, resilient flooring and wood / timber flooring etc. Part 1 will penetrate the concrete slab to form an integral waterproofing, followed by part 2 which forms an incredibly hard elastomeric surface membrane.


PROTECRETE Liquid Applied Membrane (LAM)

An aqueous polymer dispersion waterproofing laminate which can be pigmented and used as and architectural coating. LAM is a non yellowing UV resistant, weather resistant, long lasting elastomeric coating that provides impact resistance, stress crack resistance, and provides excellent resistance to damage from oil, acid, salt and alkali. PROTECRETE LAM coats and tenaciously adheres to clean, dry, surfaces such as concrete, drywall masonry and wood etc.


PROTECRETE Wood Protector

An effective UV resistant waterproofing sealer, preservative and colour stabiliser, developed to protect timber / wood against fungus, mildew, algae, airborne pollutants etc. PROTECRETE Wood protector’s waterproofing ability will alleviate or prevent warping, cracking, and shrinking, whilst providing an extraordinary flame resistance to treated wood.

 © 2006-2013 Protecrete International Pty Ltd